Excitron Logo
  Cart: US $0.00   

make it a Great day!



Product Search

Categories

    All Categories
    X Controller-
     motors
  
    Controller-motor-
     gearhead kits
  
    Stepper Motors  
    Bearings  
    Custom hardware  
    Accessories  
    Arbor Presses  
    Cables & Adaptors  
    Computers  
    CNC Machines/kits  
    DRO  
    Encoders  
    Gears and Racks  
    Grippers & Rovers  
    Leadscrews  
    Planetary Gears  
    Power Supplies  
    Pulleys and Belts  
    Rotary Chucks  
    Rotary Tables  
    Shaft Couplers  
    Sliders  
    USB Products  
    XY & XZ Robots  
    XYZ Robots  
    Z-Lifts  
    Previous Products  
    Coming soon  
    Donations  

Other Links

    Documentation
  
    Motor Information
  
    CNC and Gcode help
  
    How to Buy
  
    Excitron News
  
    FAQ
  
    Testimonials
  
    Serial programs
  
    Change by text file
  
    US Postal rates
  
    Checkout
  
    My Account
  
    Site Map
  
    Add item/adjust
  


 
  
Easily change many Motion Profiles at once, by sending a text file, instead of typing each individually--very handy!

Your serial program, like Realterm, must have a 50msec char delay and 150 msec line delay. These delays could be shorter, but most files just take a few seconds. No separate Excitron controller command needed, just send your file. In Realterm, select the Send tab. In lower section, click 3 dots to select your text file. Change Char Delay to 50 msec/char and Line Delay to 150msec. Then click Send. See Serial Programs link for more details.

Many Excitron rotary tables can have a gear ratio of 486:1 and 90:1. After you physically mount the motor in the gear ratio position you want, you will want to change the Joysticks. You can do this quickly and easily, without errors, by sending a text file.

Examples below are recommended for 486:1 and 90:1, but you can make these any values you want. The text file for changing the 10 Joystick Motion Parameters to 486:1 is 486:1.

P18
N0000540
W
P20
N0002700
W
P22
N0016200
W
P24
N0024300
W
P26
N0194400
W
P28
N0000540
C
P30
N0002700
C
P32
N0016200
C
P34
N0024300
C
P36
N0194400
C

The N parameters above are set for 1, 5, 30, 45 degrees, and 1 revolution. With these degree values, you can rotate to any angle. For instance, to rotate to 12 degrees, push J1 2 times and J2 2 times, total of 12 degrees. The really nice DRO digital readout will show you the position and degrees as you push each Joystick. There are 2 sections because for 486:1 ratio, usually J1-J5 is CCW AND J6-10 IS CW. You can copy/paste these values to your own text file. CR and LF chars are ok because the Excitron controller ignores them. Do not add any comments, etc., send just as you see above.

The text file for changing the 10 Joystick Motion Parameters to 90:1 is 90:1.

P18
N0000100
C
P20
N0000500
C
P22
N0003000
C
P24
N0004500
C
P26
N0036000
C
P28
N0000100
W
P30
N0000500
W
P32
N0003000
W
P34
N0004500
W
P36
N0036000
W

The N parameters above are set for 1, 5, 30, 45 degrees, and 1 revolution. There are 2 sections because for 90:1 ratio, usually J1-J5 is CW AND J6-10 IS CCW. Note the direction is reversed, because the 486:1 has an additional spur gear set, which reverses direction. You can copy/paste these values to your own text file.

If you only rotate in one direction, then set the 10 Joysticks to 10 different angles--awesome! Now you can see how easy it is to modify the text file and change other parameters, like time t command, V for steps/second, and others.

Here is an example text file for changing the gear ratio little c command c commands linear leadscrew for linear motion:

c~
L
1
G07313
G07313
Q

This our linear leadscrew ratio for one of our CNC mills. The ratio comes from a 9.33333 spur gear set and a .2008" precision leadscrew, and 400 hsteps / motor rev.

 
  



You Are Visitor

76597


© Copyright 2020 Excitron Corporation All Rights Reserved.
© Copyright 2020 PowerWebsites.com All Rights Reserved.
Shopping Cart Powered by PowerWebsites.com