Excitron Logo
    Cart: US $0.00   

make it a Great day!



Product Search

Categories

    All Categories
    X Controller-
     motors
  
    Controller-motor-
     gearhead kits
  
    Stepper Motors  
    Bearings  
    Custom hardware  
    Accessories  
    Arbor Presses  
    Cables & Adaptors  
    Computers  
    CNC Machines/kits  
    DRO  
    Encoders  
    Gears and Racks  
    Grippers & Rovers  
    Leadscrews  
    Planetary Gears  
    Power Supplies  
    Pulleys and Belts  
    Rotary Chucks  
    Rotary Tables  
    Shaft Couplers  
    Sliders  
    USB Products  
    XY & XZ Robots  
    XYZ Robots  
    Z-Lifts  
    Previous Products  
    Coming soon  
    Donations  

Other Links

    Documentation
  
    Motor Information
  
    CNC and Gcode help
  
    How to Buy
  
    FAQ
  
    Testimonials
  
    Serial programs
  
    US Postal rates
  
    Checkout
  
    My Account
  
    Site Map
  
    Add item/adjust
  


 
  
Product Information

10A-USB -- Controller/Driver, 4 amps, USB - Controller/Driver. rated 4 amps


Put Mouse On Image To View Above
Click Image To Open X-Large Photo
 


10A-USB -- Controller/Driver, 4 amps, USB

Controller/Driver. rated 4 amps

List Price:   US $369.00
Our Price:   US $229.00
You Save:   US $140.00
   
Qty:      



Email To
Friend

Print
Product
 
Item Details
 
10A-USB

Controller/driver only (without motors).  Normally you will purchase the integrated motor/controller.<p>This unit is the same as described for the integrated motor/controllers pages, but usually comes with a 5 pin connector.  Select this controller to drive unipolar stepper motors that are size 23 (57mm) or smaller. The 10A-USB can drive up to 10 amps burst, 3 normally.  These controllers are microminiature and exceptionally small, see the motor/controller drawings for dimensions.  Select this controller for the most economical solution.  Serial USART is +5 volt USB with mini-USB female connector.  Includes a standard mini-USB--female type-A cable.

This controller runs "right out of the box" by typing a \'w\' then \'G\'. Each Excitron controller includes all the electronics and drivers for running the stepper motor. There are no separate electronic boxes and no messy cables. Included here is a full range of details of our motor/controller family.

You easily control how your stepper motor operates in these modes:

  • Serial Command Mode: send and receive via USB. Connection with PCs, PLCs or Labview work well.
  • Standalone Motion Profile Mode: repeatedly run a sequence of motion profiles, exactly as you wish, upon powerup. In this case, your computer is not needed. You can use inputs to control how and when these profiles run.
  • Input Profile Mode: each of up to 3 input pins trigger 3 motion profiles each, giving you random selection of motion by simply pushing buttons.
  • Driver (CNC step/dir) Mode: motor steps each time when an external STEP occurs, in the direction set by DIRECTION. CNC programs usually output these signals on a PC parallel port.

You can combine many of these modes, with few restrictions. Hundreds of successful customers have created very ingenious motion using these simple "building blocks", some in as little as 10 minutes.

You can easily setup the Excitron controller for standalone (Motion Profile) mode so that it performs exactly as you wish upon power-up. In this case, your computer is not needed. The Excitron controller has many useful modes for inputs and for the one output, so that you can add intelligent repetitive motion to almost any device. Connection with PLCs or Labview work well.




 



You Are Visitor

65953


© Copyright 2019 Excitron Corporation All Rights Reserved.
© Copyright 2019 PowerWebsites.com All Rights Reserved.
Shopping Cart Powered by PowerWebsites.com